How Are Electric Showers Installed?

Being able to know how electric showers are installed is one of the best advantages you have, since you will save the cost of calling a technician to install.

First-hand we tell you that electric showers or showers are easy to install and can be placed in the installation process by almost anyone who has some basic knowledge of electricity-related installations (without the need to be an electrician) . Obviously, the best possible safety measures must be taken into consideration to avoid an electrical incident. Would you like to know more? Then don’t back out! Shortly, we will answer the question about How are electric showers installed?

Before installing the electric showers, you must see if it works with 110v or 220v current, in the same way before starting the installation, visualize if you have already turned off the power source as having the necessary tools to place it safely and firmly electric showers in the area you want.

The most ideal is to have a series of steps that help you plan everything you need to install these electric showers successfully in your home.

Step 1: Look at the voltage type of your electric showers

As we said previously, some electric showers have a current voltage of 110v while others have 220v. If we try to install a 220v one on a 110v electrical network, there will not be enough voltage to turn it on and if we install 110v electric showers on a 220v electrical network, the only thing that we will achieve is to damage the device, in addition to running the risk of electrocution in the process.

Step 2: Check the outlet

The electrical outlet is very important when installing electric showers, since they will (or will not) have the necessary input to successfully connect electric showers.

Normally, all electric showers have three outlets, the third being for the ground connection.

Step 3: Before installing, remember to turn off everything

Never try to install the electric showers with the electrical network on, this can be fatal for you, especially if the electric showers are 220v, you could suffer a strong electric shock if you do not turn off the electricity beforehand.

Step 4: Prepare the installation area

Once you have carried out all the previous steps successfully, in this one we will concentrate on removing the old shower (if one has been previously installed in the place). Typically some electric showers have a curved tube that allows entry into the internal plumbing and allows the electric showers to stay correctly in position.

Step 5: Install the power cord clips or clips

This step is simple, once the electric showers are inside the water pipe, simply extend the electricity cable through the area specified in the manual, some cables may be in the electrical network pipe, while others you can simply hold them. with staples or fasteners thanks to the walls.

Step 6: Connect the electric showers to the electrical outlet

Once you have properly installed the electric showers on the base, it is time to connect it to the electrical outlet (the outlet). Remember to have previously installed the ground connection, it is important that one of the internal cables of the electric showers goes directly to the ground.

Step 7: Check for a water leak

Normally electric showers (or any other showerhead) shouldn’t leak, but they can happen, especially if you don’t squeeze them in such a way that they are attached to their base.

Step 8: Turn on the power shower switch

Finally, it is time to test your electric showers , turn on the power and turn on your electric showers, here you can enjoy the best sensation of hot water of all.

Related Post

Leave a Reply

Your email address will not be published.